Flight Log - 2019-07-31 - Matthew Bond's Custom Rockets Landviper
18mm 3 motor cluster rocket where the motor mount tubes form the lower half of the rocket and fit into the BT60 upper payload sectIon. Fin can assembly has 6 fins mounted on a BT60 ring which slides over the end of the three motor tubes. Stickers instead of decals. Nice looking rocket. Upgraded the recovery system with a Kevlar shock cord.
| Flight Date: | 2019-07-31 |
| Rocket Name: | Custom Rockets Landviper |
| Kit Name: | Custom Rockets - Landviper {Kit} (10001) |
| Flyer's Name: | Matthew Bond |
| Motors: | 3xC6-5 |
| Wind Speed: | 4.00 mph |
| Launch Site: | NARAM 61 |
First Flight! All motors lit on the pad, nice straight, high boost. Arcing into the wind at the top of the climb, still nose up at ejection. Good chute, short walk, 1 row deep in the soybeans, no damage.
| Stage | Motor(s) |
|---|---|
| 1 | 3 x Estes C6-5 |
Sponsored Ads
 |
 |