Building for a NAR L1. Good Kit and goes together easy but did have warped fins out of the box. I used angle and clamps to keep them straight till the glue dried. All tubes fit together just right.
weight without engine 93oz
weight with engine 117 oz
Looks like I’ll fly this one with a J500 for my L2 also this Spring. Update, I passed my written L2 test without any problems, and flew it on a Aerotech J500G, great choice for my L2 in this Rocket.
I got a K185W, it has a 8 sec burn and should put this into the Mile high club.
UPDATE: Flew this in Orangeburg to 6700'
Reloads I have tried: I364FJ, I327DM, J500G, K185W, CTI I236
| Flight Date: | 2012-12-15 |
| Rocket Name: | HyperLOC 835 |
| Kit Name: | LOC/Precision - HyperLOC 835 |
| Flyer's Name: | Rodney Earp |
| Motors: | I364 |
| Expected Altitude: | 2,466.00 Feet |
| Wind Speed: | 1.00 mph |
| Launch Site: | ROCC |
On the launch pad and had to scrub, due to Alt problem. Found out the problem was my wiring on the Raven 3. Need better testing next time! Came home without flying!
| Stage | Motor(s) |
|---|---|
| 1 | Aerotech I364FJ |
Sponsored Ads
 |
 |