2013-12-21 - Rodney Earp's HyperLOC 835

Flight Log - 2013-12-21 - Rodney Earp's HyperLOC 835

Building for a NAR L1. Good Kit and goes together easy but did have warped fins out of the box. I used angle and clamps to keep them straight till the glue dried. All tubes fit together just right.

weight without engine 93oz

weight with engine 117 oz

Looks like I’ll fly this one with a J500 for my L2 also this Spring. Update, I passed my written L2 test without any problems, and flew it on a Aerotech J500G, great choice for my L2 in this Rocket.

I got a K185W, it has a 8 sec burn and should put this into the Mile high club.

UPDATE: Flew this in Orangeburg to 6700'

Reloads I have tried: I364FJ, I327DM, J500G, K185W, CTI I236

Flight Date:	2013-12-21
Rocket Name:	HyperLOC 835
Kit Name:	LOC/Precision - HyperLOC 835
Flyer's Name:	Rodney Earp
Motors:	I236
Certification Flight:	Level 1
Wind Speed:	10.00 mph
Launch Site:	ROCC
Actual Altitude:	1,706.00 Feet

This was a Tripoli Level 1 flight, same as always, good flight, nice deployment. even with wind it drifted over next to the road in a cow pastor. the cows didn't know what to think of the rocket or me and wanted to get way closer than I wanted. I'm lucky the rocket wasn't eaten, stepped on or stuck in a nice warm cow patty. but everthing was good.

FILE: C:\Users\Misha\Desktop\Raven 3\Dec 21 2014 Hyperloc.FIPa

Average PreLaunch Altitude (ft) = Val: 244.00

Average PreLaunch Axial (Gs) = Val: 1.01

Average PreLaunch Axial Offset = Val: 1.01

Axial Accel (Gs) = Min: -0.94 Max: 12.66

Baro (Atm) = Min: 0.9300 Max: 0.9912

Current Draw (A) = Min: 0.00 Max: 0.00

Flight Count = Val: 66.00

Lateral Accel (Gs) = Min: -1.69 Max: 4.66

Motor Ignition Time (sec) = Val: 0.180

Temperature (F) = Min: 79.12 Max: 79.46

Time (sec) = Min: 0.000 Max: 11.580